Author Topic: Got to move some stuff, new project incoming! (Read 4593 times)

Chris · « **on:** February 26, 2014, 08:46:41 PM »

most of an oval body. New project in the works! $100 - SOLD.

32" Ladder bars $200

Full set of repop early fenders $200 - SOLD

Ceramic coated A1 lowdown header, magnaflow muffler with custom mount, 1" tranny raise mount $225 - SOLD

Stainless hard fuel line with -6 AN fittings, bent to fit in the lip of your pan, from front of car to back $25

Formula Vee Shifter $40 - SOLD

Chris · « **Reply #1 on:** February 26, 2014, 09:42:07 PM »

more....

Chris · « **Reply #2 on:** March 15, 2014, 08:30:39 AM »

UPDATED

If anyone is interested in die-cast I still have a lot left and you can arrange a time to come check them out.

Chris · « **Reply #3 on:** March 16, 2014, 03:44:44 PM »

Fiberglass decklid $150

New never mounted

Like this one

Chris · « **Reply #4 on:** March 29, 2014, 08:21:40 AM »

Mexi 043 heads
94mm 40x35.5
New springs (cb650)
Originally ported by Darren (Kroc)
Cleaned up and checked over at Paradise on my last trip.
Match ported idf/drla manifolds

ASF member local price $800

Pictures here --> https://www.facebook.com/media/set/?set=a.10153930565500004.1073741832.891745003&type=3

Chris · « **Reply #5 on:** April 05, 2014, 04:59:00 PM »

Roll bar from my 61, 46 1/2" high X 46 wide, rough outside measurement

$100

SOLD...

Chris · « **Reply #6 on:** April 06, 2014, 08:17:11 PM »

Pair of Old School K&N IDA Air filter base and tops with filters $100

Chris · « **Reply #7 on:** April 09, 2014, 07:53:57 PM »

Reasonable offers are always considered, feel free to send me a PM.

I will reply to all except from WESTY69

Chris · « **Reply #8 on:** April 10, 2014, 12:28:23 PM »

If you do a trans raise you will need a lowered header to fit under the apron, as for stupid low that's up to you to decide.

Chris · « **Reply #9 on:** April 15, 2014, 07:52:03 AM »

Geoff · « **Reply #10 on:** April 15, 2014, 08:51:03 AM »

I think everyone checks back to see what the new project is...

Chris · « **Reply #11 on:** April 15, 2014, 08:59:08 AM »

My marketing team is working hard!

silas · « **Reply #12 on:** April 15, 2014, 11:17:12 AM »

Quote from: Chris on April 15, 2014, 08:59:08 AM

My marketing team is working hard!

better tell your sales team to pick up the slack…your ratio of classified add views to actual sales to money made is a little on the low side!

Chris · « **Reply #13 on:** April 15, 2014, 11:29:12 AM »

Silas you'd be surprised as to how much merchandise has actually moved!

silas · « **Reply #14 on:** April 15, 2014, 11:32:20 AM »

Quote from: Chris on April 15, 2014, 11:29:12 AM

Silas you'd be surprised as to how much merchandise has actually moved!

i don't believe you. a pic of your cleared out garage with the new project in it would help.

Adrenaln · « **Reply #15 on:** April 15, 2014, 01:10:47 PM »

It doesn't count when jerry checks back 3 times a day lol

Chris · « **Reply #16 on:** April 15, 2014, 03:29:34 PM »

Quote from: silas on April 15, 2014, 11:32:20 AM

Quote from: Chris on April 15, 2014, 11:29:12 AM
Silas you'd be surprised as to how much merchandise has actually moved!

i totallt believe you. a pic of your cat with the new project in it would help.

I don't have a cat.

WESTY69 · « **Reply #17 on:** April 15, 2014, 04:42:20 PM »

Darren (adrenaline) this site is awesome , can you blame me , plus , I'm looking forward go seeing Chris's new project !!!

Chris · « **Reply #18 on:** April 24, 2014, 03:58:10 PM »

slammedbus · « **Reply #19 on:** April 25, 2014, 10:20:50 AM »

Quote from: Geoff on April 15, 2014, 08:51:03 AM

I think everyone checks back to see what the new project is...

Yup!

Chris · « **Reply #20 on:** April 26, 2014, 01:17:40 PM »

Would really like to move the heads and the rest of the parts I have, almost ready to move the project in and post pictures!

Chris · « **Reply #21 on:** April 26, 2014, 09:35:38 PM »

Porsche bolt pattern Ercos c/w washers (15x3.5, 3.25" backspace bubble fronts and 15x6, 4" backspace rears) $650

Front Porsche bolt pattern disk brakes, c/w rotors, calipers, brackets, 14mm press in studs, 2 1/2 dropped K&L spindles $475 - sold

Rear Porsche bolt pattern disk brakes (no ebrake) c/w rotors, calipers, brackets, 14mm press in studs $280 - sold

Brakes are barely used, never on the street. Buy both sets and Ill throw in the master cylinder, hoses, and reservoir.

Chris · « **Reply #22 on:** April 27, 2014, 04:35:29 PM »

Disk brake pictures

Chris · « **Reply #23 on:** April 27, 2014, 04:36:12 PM »

M&H Racemaster Slicks 15x6x26 $250 Lots of life in them

Chris · « **Reply #24 on:** April 27, 2014, 04:46:33 PM »

Here are some items I am looking for

fiberglass doors
fiberglass front end mount
hydraulic clutch parts

If you have anything im looking for let me know, trades?

Chris · « **Reply #25 on:** May 02, 2014, 04:51:00 PM »

Ok, Im willing to entertain reasonable offers on anything left, I need to move this stuff in the next few weeks.

Chris · « **Reply #26 on:** May 10, 2014, 12:09:28 PM »

Brakes sold!