Author Topic: Can I borrow a torque tool  (Read 2787 times)

0 Members and 1 Guest are viewing this topic.

Offline Herrlowlight

  • Full Member
  • Posts: 496
  • Country: ca
  • Karma: 1
  • OldBusBoy
Can I borrow a torque tool
« on: June 04, 2012, 01:16:12 PM »
Looking to borrow a torque tool to remove the 36mm castle nuts on my rear drum.

Can exchange for beer.. will handle tool as if it was my own (will wipe off grease :) )

Trevor
1967 SO42 Westfalia
1959 Karmann Ghia

Offline 66DB

  • Full Member
  • Posts: 112
  • Karma: 0
Re: Can I borrow a torque tool
« Reply #1 on: June 04, 2012, 07:00:44 PM »
If you can take it to Kal Tire or another tire shop, I towed my car there and they did it for free in a few minutes

Offline Herrlowlight

  • Full Member
  • Posts: 496
  • Country: ca
  • Karma: 1
  • OldBusBoy
Re: Can I borrow a torque tool
« Reply #2 on: June 11, 2012, 08:48:50 AM »
Good suggestion.. I have to do the brakes (and install a motor) before I can do that. Might be easier to just buy a 36mm socket and borrow an impact gun

Trevor
1967 SO42 Westfalia
1959 Karmann Ghia

Jodasa

Re: Can I borrow a torque tool
« Reply #3 on: July 11, 2012, 10:09:30 AM »
No one has one of these to lend out?

Offline owdlvr

  • Dave Hord
  • *
  • Posts: 1415
  • Country: ca
  • Karma: 10
    • Classic Car Adventures
Re: Can I borrow a torque tool
« Reply #4 on: July 11, 2012, 10:15:57 AM »
I can bring you this style...



...to the DVKK Sea to Sky Cruise this Sunday.

Let me know ahead of time, though, as I don't normally carry it with me.

-Dave
--
'71 Type 1 - Rally Car Project
'75 Type 1 - Heirloom
'95 F150 - Unfortunate daily driver...

Offline Geoff

  • *
  • Posts: 8427
  • Country: ca
  • Karma: 440
    • http://airspeedparts.com
Re: Can I borrow a torque tool
« Reply #5 on: July 11, 2012, 10:27:17 AM »
I can lend you one but i've done it twice and never got them back.

drop me a pm, it's in East Van.

Jodasa

Re: Can I borrow a torque tool
« Reply #6 on: July 12, 2012, 12:39:05 PM »
I can bring you this style...



...to the DVKK Sea to Sky Cruise this Sunday.

Let me know ahead of time, though, as I don't normally carry it with me.

-Dave


Thanks for the offer Dave, I have that unit... I'm looking for the one Geoff has for gland nut removal.

Jodasa

Re: Can I borrow a torque tool
« Reply #7 on: July 12, 2012, 12:42:09 PM »
I can lend you one but i've done it twice and never got them back.

drop me a pm, it's in East Van.


Seriously? The bastards!!!
Thanks Geoff, I'm probably better off just buying one. Do you know if the CIP style are ok?
http://www.cip1.ca/ProductDetails.asp?ProductCode=ACC%2DC10%2D7036

Offline vwboop

  • *
  • Posts: 1898
  • Country: ca
  • Karma: 12
  • Chris & Gina
Re: Can I borrow a torque tool
« Reply #8 on: July 12, 2012, 01:20:40 PM »
Just FYI for all you bus guys with small nuts, the torquemeister doesn't work on your busses as the axle snout is too long.

Offline billybob57

  • *
  • Posts: 297
  • Country: ca
  • Karma: 0
Re: Can I borrow a torque tool
« Reply #9 on: July 12, 2012, 01:39:03 PM »
I can bring you this style...



...to the DVKK Sea to Sky Cruise this Sunday.

Let me know ahead of time, though, as I don't normally carry it with me.




-Dave


Thanks for the offer Dave, I have that unit... I'm looking for the one Geoff has for gland nut removal.

I have One of these!!!! :)  Call if needed!

 

Powered by EzPortal