Author Topic: 12v Turn Signal Flasher  (Read 1102 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike Scott

  • Full Member
  • Posts: 726
  • Country: ca
  • Karma: 0
12v Turn Signal Flasher
« on: April 27, 2006, 07:42:56 AM »
I dug up a 12V turn signal flasher.

Anybody know what terminals goes where?

Terminals
-49a
-49
-31

Wires to hook up
-Power from fuse block
-Light in speedo
-Wire from steering column

thanks
Mike

Offline 68IIIbuggy

  • Full Member
  • Posts: 367
  • Karma: 2
    • http://
12v Turn Signal Flasher
« Reply #1 on: April 27, 2006, 06:26:33 PM »
www.type2.com has a great article on turn signal flashers, I was just looking at it.

Offline Mike Scott

  • Full Member
  • Posts: 726
  • Country: ca
  • Karma: 0
12v Turn Signal Flasher
« Reply #2 on: April 28, 2006, 02:15:34 PM »
Thanks, I couldnt find it on there though!

Offline silas

  • *
  • Posts: 6779
  • Country: ca
  • Karma: 20
    • Some cool videos...Check them out!!
12v Turn Signal Flasher
« Reply #3 on: April 28, 2006, 05:24:57 PM »
hey mike, i looked at the 12v relay on my 64 and it doesnt have the # terminals but uses letters instead.

this is how it looks...


.....P.....
X.........L


X= from turn signal mechanism on steering column
P= from speedo
L= from fuse box

 

Offline Mike Scott

  • Full Member
  • Posts: 726
  • Country: ca
  • Karma: 0
12v Turn Signal Flasher
« Reply #4 on: April 28, 2006, 08:57:29 PM »
thanks silas, I got the signals all working with the 6V flasher. They just flash a little fast, cant seem to make the 12V one work, I think I tried every combo possible......

I see on wiring diagrams 12V signals also have a 9 pin switch of some sort, maybe the 3 prong 12V flasher I have doenst work for my application?

Offline BUSDADDY

  • Full Member
  • Posts: 1273
  • Country: ca
  • Karma: 7
  • Like potato chips, you can't have just one
12v Turn Signal Flasher
« Reply #5 on: April 28, 2006, 10:40:53 PM »
The 9 pin setup is just a flintstones way to run the emergency flasher in late 6V and early 12V cars. If a 3 pin 6V flasher works I'd suspect your 12V 3 pin flasher is nfg. At worst it should work but not run the dash light.
RUST NEVER SLEEPS

Offline tanman

  • Full Member
  • Posts: 161
  • Karma: 0
    • http://
12v Turn Signal Flasher
« Reply #6 on: April 29, 2006, 10:40:09 AM »
thats exactly what mine does. sometimes i feel like an old man when i realized ive left the signal on for a minute or two haha
tanner

 

Powered by EzPortal