Author Topic: Tach Light On When Switch Is Not On (Read 2432 times)

egspot · « **on:** October 21, 2007, 05:58:35 PM »

So I installed the tachometer and it is working:

Cables:
Black= Ground
Red=power 12V
Green= negative terminal on the coil
White- light for the tach. On my old 64 there was a conection with the lights power and it worked great. on the pictures below, I can't find a sourse and the left 1st and 2nd both suply continues power. Anyone wants to point me in the right direction?

dannyboy · « **Reply #1 on:** October 21, 2007, 11:26:35 PM »

find out which prong on the headlight switch is for the dash lights, and connect it there...
i looked on vintagebus.com wiring diagrams, and the prong should be labeled 58b i think (check for yourself to make sure you have the same switch...

egspot · « **Reply #2 on:** October 22, 2007, 05:45:23 AM »

Thanks Danny.

GMB · « **Reply #3 on:** October 24, 2007, 02:22:02 PM »

Or piggy back off one of the dash lights!

egspot · « **Reply #4 on:** October 24, 2007, 10:20:32 PM »

Quote

Or piggy back off one of the dash lights!

Does that mean I spliced them toguether?

or

Can i look and find a part that would do it?