Author Topic: Ghia Inside Metal Part  (Read 768 times)

0 Members and 1 Guest are viewing this topic.

Offline xcasper

  • Full Member
  • Posts: 49
  • Karma: 0
Ghia Inside Metal Part
« on: July 20, 2006, 10:36:17 AM »
Hi, after some discussions with my vw guru, rustybus, It has been decided that I need an inside rear seat mount from an earlier model ghia, ( I have a '74 ) - that can be cut out and welded into place in my car, so that I can install my back seats. Ok, so it would be two pieces of metal from a frame that has them there, so if that guy that had the free ghia shell is still around that would be good, or whoever got that shell, I guess it would be a 69 frame or something. I honestly don't know what these pieces are called, but I guess you guyz get the idea or whatever.  From what Chris explained to me, they hold the back seat backrest in place. Oky Doky? Puleazze fellas, look under your tarpz.  -S-

Offline jason_hamilton

  • Admin
  • Posts: 587
  • Karma: 2
  • 1969 Karmann Ghia 2161cc
Ghia Inside Metal Part
« Reply #1 on: July 20, 2006, 05:10:19 PM »
The Ghia's in my garage, and I haven't started cutting, yet.
I can provide whatever you need. Ideally, you and Chris come and have a look at it and we'll mark off the sections you need. I have the seat as well.
 
Jason Hamilton

Offline rustybus

  • Full Member
  • Posts: 1641
  • Karma: 1
Ghia Inside Metal Part
« Reply #2 on: July 21, 2006, 02:04:52 AM »
Hmmmm how did I have this feeling you had this :D . I will see if I can make it by on the 30th if that is ok with you