AirSpeed VW Community Forums
Technical => Electronics & Car Audio Forum => Topic started by: hugecalves170 on December 20, 2007, 03:54:02 PM
-
Hi all,
I am the guy who bought Shanes 61 vert. I just received reproduction turn signal switch, as I had a mishap with the the previous one . The new one I received came with nothing to distinguish any one of the 6 wires from another, aside from colors, which are different from the wires in the original one. Would it be safe to plug and play? I am a little gun shy right now, after the last wire melting incident! any suggestions? I have contacted the parts distributor, but have not heard anything back.
-
ll
-
I don't know what that means? but thanks anyway, I think?
-
Do you have any book on VW.
I don't think the vert is all original wiring and probably has been changed to 12v.
Here (down) is a wiring example:
http://www.airspeedparts.com/community-for...1654&hl=diagram (http://www.airspeedparts.com/community-forum/index.php?act=ST&f=11&t=11654&hl=diagram)
http://www.airspeedparts.com/community-for...=ST&f=3&t=11380 (http://www.airspeedparts.com/community-forum/index.php?act=ST&f=3&t=11380)
Hope that helps.
You may also call Shane and ask him if he remembers. He a very good guy and may point you in the right dirrection.
-
The only book I have so far is the Haynes manual, just ordered the Bentley. Thanks for the link, you are right it is 12V. If I get really stuck I will give him a call.