Author Topic: Update: Dec 10 2005  (Read 9575 times)

0 Members and 1 Guest are viewing this topic.

Offline jason_hamilton

  • Admin
  • Posts: 587
  • Karma: 2
  • 1969 Karmann Ghia 2161cc
Update: Dec 10 2005
« on: December 10, 2005, 11:19:11 AM »
Jim is getting ready to mate the body to the new pan, so here's a few pics:



Steering box:


Innovate Motorsports O2 sensor and lambda feed:


Ignition:


Line lock:


Staging brake:


Kill switch:


Trans:


Turbo Jim drills his own rotors. Handy guy!




This is cool. The body is off it's original pan, and when the body gasket was removed, you can see the original paint.
Note the clean threads in the bolt holes. This is a 50 year old car!

 
Jason Hamilton

Billyisgr8

Update: Dec 10 2005
« Reply #1 on: December 10, 2005, 12:46:46 PM »
\"Turbo Jim drills his own rotors. Handy guy\"

So are you saying he hasn't done any of the other fab work then???

I see a new employee starting soon

haha!!

Kevin

Offline jason_hamilton

  • Admin
  • Posts: 587
  • Karma: 2
  • 1969 Karmann Ghia 2161cc
Update: Dec 10 2005
« Reply #2 on: December 10, 2005, 01:27:20 PM »
No, I'm just pointing out that his talents are multi-dimensional.
(shameless ass-kissing)
Jason Hamilton

Offline dannyboy

  • Full Member
  • Posts: 1082
  • Karma: 1
Update: Dec 10 2005
« Reply #3 on: December 10, 2005, 01:28:13 PM »
your only saying that cause its pay-day!

Billyisgr8

Update: Dec 10 2005
« Reply #4 on: December 10, 2005, 03:32:28 PM »
Quote
No, I'm just pointing out that his talents are multi-dimensional.
(shameless ass-kissing)
OK I guess you can stay on then if you can guess the cross drilled hole pattern.

Kevin

Offline GRK

  • Full Member
  • Posts: 638
  • Karma: 0
    • http://
Update: Dec 10 2005
« Reply #5 on: December 10, 2005, 10:25:09 PM »
Are you keeping the body as is ? Or is it going to be painted ?

Gary

Offline Darren Dilley

  • *
  • Posts: 648
  • Karma: 0
Update: Dec 10 2005
« Reply #6 on: December 10, 2005, 10:43:04 PM »
sweet i cant wait.... to see it sit'n on the ground...
life without racing..is no life at all

Offline Klaatu

  • *
  • Posts: 217
  • Karma: 0
    • http://www.airspeedparts.com
Update: Dec 10 2005
« Reply #7 on: December 10, 2005, 10:48:57 PM »
The body will stay as is. I plan to do a couple of things to the firewall and up front but thats it. Some things are just too cool to paint....... ;)    
I can't reach the bottom but I sure bang the sh*t out of the sides....

Offline ScreamnStroker

  • Full Member
  • Posts: 587
  • Karma: 0
Update: Dec 10 2005
« Reply #8 on: December 10, 2005, 11:28:22 PM »
Wow Jim, Great work!!
Glad to hear the Body is staying the same
i love the look of that car!!! :rockon:  

Offline Matt Davis

  • Full Member
  • Posts: 81
  • Karma: 0
    • http://www.mattdavisracing.com
Update: Dec 10 2005
« Reply #9 on: December 13, 2005, 11:53:27 AM »
That thing is going to be awesome!

Offline josh

  • *
  • Posts: 2248
  • Karma: -17
Update: Dec 10 2005
« Reply #10 on: December 14, 2005, 12:38:45 PM »
THAT THING IS INSANE!!!!!!! How does a staging break work?? Different than line lock obviously, is it to preload the clutch at the line?
55 ragtop T1
56 kombi T2

Offline cdm

  • Full Member
  • Posts: 35
  • Karma: 0
Update: Dec 10 2005
« Reply #11 on: December 14, 2005, 08:37:49 PM »
Id like to buy one of those staging brakes, can it be used a steering brake?


Can i buy them at your store?


I also need one of those jamar park locks..


chris

Offline Klaatu

  • *
  • Posts: 217
  • Karma: 0
    • http://www.airspeedparts.com
Update: Dec 10 2005
« Reply #12 on: December 15, 2005, 09:24:30 AM »
Hey Chris, Give me a call at the shop and I can explain in more detail what would work best for you. Yes, the staging break is for loading the drivetrain and building boost on the line. Thanks Matt, for the interest in the car. TJ
I can't reach the bottom but I sure bang the sh*t out of the sides....

Offline jim martin

  • If something is priced to good to be true ,do yourself a favour. DONT be a IDIOT and BUY IT
  • *
  • Posts: 1406
  • Karma: 1
    • http://www.dialedinperformance.com
Update: Dec 10 2005
« Reply #13 on: December 15, 2005, 12:59:46 PM »
jim if you are using the aux box or the rpm conector for additional data inputs watch where you run the LM1 components and wiring for it.i've had to relocate my wiring and added surge absorbers and a filter capaciter to help eliminate stray voltages showing up on my recorderd data for various components.
this will give some part #'s and ideas
CLICK HERE




the 'WOK" June 2006 Hot VW's feature car  9.830 sec at 143.44 mph.
Sponsored by : LUCAS OIL PRODUCTS   www.lucasoil.com
KROC head porting services
Dialedinp

Offline Cornpanzer

  • Full Member
  • Posts: 35
  • Karma: 0
Update: Dec 10 2005
« Reply #14 on: December 19, 2005, 11:11:35 AM »
Geoff told me to come here and look at this project and I am floored!  This is going to be an amazing piece of work.  Cant wait to see how it runs!

What is the plans for engine management?

Good job!  :rockon:  
Phone 604-881-2233  for the areas best prices on Propelyene Oxide - Ask for Geoff!

Offline Klaatu

  • *
  • Posts: 217
  • Karma: 0
    • http://www.airspeedparts.com
Update: Dec 10 2005
« Reply #15 on: December 23, 2005, 11:32:23 PM »
Hey Dave , Thank-u for the kind words and the interest in the car. I will be using Mega-squirt 3.0 v2 for the engine management. Sorry I took so long to reply but we have been having problems with the site. I just mounted the brain and relay board in the car yesterday. I want to get a little more done and then I will do another update. I am waiting on wheels (8 week build time) and a few other things and then the pan should be ready for the body. I have to narrow the axles and make a custom length shift rod ect. ect. The body should go on in jan. Thanks TJ
I can't reach the bottom but I sure bang the sh*t out of the sides....

Offline Lanny

  • *
  • Posts: 1346
  • Karma: 6
Update: Dec 10 2005
« Reply #16 on: January 25, 2006, 08:05:00 PM »
What's the latest from Clamtoo?

Russ

Update: Dec 10 2005
« Reply #17 on: January 26, 2006, 07:49:07 AM »
i just finished powdercoating some more stuff for it last night.
i believe when he gets these parts back it will be rolling again.
but Jim will have to confirm that

(thats rolling not running :D )
« Last Edit: January 26, 2006, 09:53:09 AM by Russ »

Offline Klaatu

  • *
  • Posts: 217
  • Karma: 0
    • http://www.airspeedparts.com
Update: Dec 10 2005
« Reply #18 on: January 26, 2006, 09:43:30 AM »
I luv u Rusty.... :wub:  Yes, old clamtooth should have a rolling pan by this weekend! I am still waiting for my back rims..(now thats painful) I will do a update as soon as I get the parts installed (few days). Back rims could still be 2 weeks so I am going to have to find something in a chevy bolt pattern to put on the back so I can roll it around. I have a certain black oval coming in at the end of the month, (few days) to finally be finished off. We will also have to get some pics of that car up on the site...2332, Berg 52's......killer!  I hope The Klam doesn't mind sharing his cave........ :o  :lol:    
I can't reach the bottom but I sure bang the sh*t out of the sides....

Offline nivag

  • Gavin Lee
  • *
  • Posts: 907
  • Karma: 1
Update: Dec 10 2005
« Reply #19 on: January 29, 2006, 03:23:38 PM »
I say screw all this cal-look crap and mount some bitchin 18's on there! Bad boy for life, 24/7...



Offline Shane

  • Full Member
  • Posts: 5843
  • Karma: -2
  • FTG Racing
    • Pointblank Installations
Update: Dec 10 2005
« Reply #20 on: January 29, 2006, 05:01:30 PM »
Can't wait to see it on the ground... I think you should take that Car to the Classic with Flossin and myself...
I will even let you spoon with me... :wub:
Jimmy that car is too kick ass...Thought process alone...
FTG Canada
Brown Sugar
2014  8.97 @ 157mph

Offline G-dog

  • *
  • Posts: 821
  • Karma: 1
Update: Dec 10 2005
« Reply #21 on: January 31, 2006, 10:42:15 AM »
Quote
I say screw all this cal-look crap and mount some bitchin 18's on there! Bad boy for life, 24/7...
Did you say Bad boy?
1967 Beetle (the only year worth considering)/Berg 5

Offline nivag

  • Gavin Lee
  • *
  • Posts: 907
  • Karma: 1
Update: Dec 10 2005
« Reply #22 on: January 31, 2006, 11:05:40 AM »
Just for you G-log (BBC lives on)