Author Topic: big nut abomination  (Read 1882 times)

0 Members and 1 Guest are viewing this topic.

Offline ryan

  • Junior Member
  • Posts: 4
  • Karma: 0
  • AirSpeed Forum Member
big nut abomination
« on: October 04, 2013, 11:34:50 PM »
Holy crap I'm about to through my single cab off the roof. I put a big nut tranny back in my 65 single cab, so far so good. New correct tyres and all new brakes. However when I put the new drums on the rear the passenger side started to rub on the backing plate after about 5 min. of driving. So I removed the drum and noticed the spacer the drum tightens up on is to far in, it is flush with the seal housing. Can anyone tell me what the problem is? Thanks